Gel Timer
0.00৳
These gel timers are perfect for determining the gel time of resinous plastics, adhesives, crying oils, two component elastomers, and paints. A low torque, synchronous motor rotates a specially shaped stirrer in the catalyzed resin or elastomer. As gelation occurs, drag exeeds torque and the motor stalls. This signals an electronic circuit which stops the clock and activates a flashing lamp. The gel time will show on the LCD display.
- Simple to operate – place the material sample in the cup, insert the wire stirrer, set the counter to 0 and switch on the unit
- No mess – No tools required – No cleanup • Motor can remain stalled overnight without damaging the unit
- Choose from three different models:
- Basic Version
- “Hot Pot” model determines gel time at temperatures up to 350 °F with a simple rheostat temperature controller
- “StablTemp Hot Pot” model determines gel time at temperatures up to 350 °F with an electronic proportioning control which regulates the set temperature with virtually no drift or variation.
|
Accessories Gel Timer
|
|
|---|---|
|
Cat. No.
|
Description
|
| PM-1810 | Paper Clip Liners for Standard Gel Timer (pk of 50) |
| PM-1807 | Wire Stirrers (pk of 100) |
| PM-1809 | Aluminum Cup Liners for Hot Pots only (pk of 100) |
|
Technical Specification for Gel Timer
|
||||
|---|---|---|---|---|
|
Cat No.
|
Description
|
Weight
|
Oerating temprature
|
Thermometers
|
| PM-1800 | Standard Gel Timer, 120VAC/60Hz | 4 lbs (2.2 kg) | Room Temperature | |
| PM-1801 | Standard Gel Timer, 220VAC/50Hz |
4 lbs (2.2 kg) | Room Temperature | |
| PM-1802 | ‘Hot Pot’ Gel Timer, 120VAC/60Hz |
4 lbs (2.2 kg) | 150 – 350 °F = 5 % of setting | Bimetal stem-type |
| PM-1803 | ‘Hot Pot’ Gel Timer, 220VAC/50Hz |
4 lbs (2.2 kg) | 150 – 350 °F = 5 % of setting | Bimetal stem-type |
| PM-1804 | ‘StablTemp Hot Pot’ Gel Timer, 120VAC/60Hz | 4 lbs (2.2 kg) | 140 – 350 °F = 1 % of setting | Bimetal stem-type |
| PM-1805 | ‘StablTemp Hot Pot’ Gel Timer, 220VAC/50Hz | 4 lbs (2.2 kg) | 140 – 350 °F = 1 % of setting | Bimetal stem-type |
| Comes complete with: Gel timer 10 Stirrers Operating instuctions |
Maximum Recording Time | 9,999 minutes, 59 seconds (167 hrs) | ||
| Minimum Recording Time | 1 second | |||
| Stir Speed | 20 rpm, = 2 % accuracy | |||
| Dimension | 7.5 x 9.0 x 5.5 in (191 x 227 x 140 mm) | |||
